MCR 9378TE 100% KEVLAR CUT RESISTANT SLEEVES - 1 EACH... DOUBLE PLY - 18 Inches - WITH THUMB SLOT... Cut Resistant Sleeve Features:High comfort levelAllows manual dexterityMade with FDA-accepted materials for use in food processing applicationsLaunderable... Industry Applications:Advanced manufacturing, automotive industry, electrical work, light heat applications, glass operations, metal stamping...
MCR 9378TE 100% KEVLAR CUT RESISTANT SLEEVES - 1 EACH
DOUBLE PLY - 18 Inches - WITH THUMB SLOT
Cut Resistant Sleeve Features:
- High comfort level
- Allows manual dexterity
- Made with FDA-accepted materials for use in food processing applications
- Launderable
Industry Applications:
Advanced manufacturing, automotive industry, electrical work, light heat applications, glass operations, metal stamping, sheet metal, food processing, meat packing.
This order is for 1 EA = 1 sleeve = 1 ARM
Cut-resistant gloves are designed to protect hands from direct contact with sharp edges such as glass, metal, ceramics and other materials. Cut-resistance is a function of a gloves material composition and thickness. You can increase your cut protection by increasing material weight (i.e. ounces per square yard), using high-performance materials such as Spectra, Kevlar, etc., or by using composite yarns made with varying combinations of stainless steel, fiberglass, synthetic yarns and high-performance yarns.
Performance characteristics can also be affected by a materials weight and coatings applied to the outside surface. Lighter weight styles are typically more flexible, resulting in less hand fatigue, while their heavier counterparts will generally provide the wearer with more cut and abrasion protection. Coated gloves enhance grip, especially on slippery surfaces. However, some coated gloves may not be appropriate for food handling applications.
Characteristics, Applications and Glove Selection for Cut Resistant Fibers and Materials
- Spectra FiberUltrahigh molecular-weight polyethylene fiber that offers high cut-resistance, even when wet. Its 10 times stronger than steel per unit weight.
- Spectra gloves are cut and abrasion resistant, often lightweight, flexible and used for food processing, appliance assembly, food service, automotive assembly and the paper industry.
- Dyneemais a superstrong polyethylene fiber that offers maximum strength combined with minimum weight. It is up to 15 times stronger than quality steel and up to 40% stronger than aramid fibers, both on weight for weight basis. Dyneema floats on water and is extremely durable and resistant to moisture, UV light and chemicals.
- Kevlar Aramid Fiber five times stronger than steel per unit weight. Inherently flame resistant it begins to char at 800F (427C). The thread made of Kevlar fiber is used to sew seams on temperature-resistant gloves.
- Kevlar gloves offer cut- and heat-resistance. Typically a lightweight flexible material that is used for many applications relating to automotive assembly, sheet metal handling and glass handling.
- Fiber-Metal Blends many durable, abrasion-resistant gloves are made of a woven fabric blend of Spectra, Kevlar and stainless steel.
- Metal Mesh interlocked stainless steel mesh offers superior cut and puncture protection due to its strength.
- Metal Mesh gloves are very cut- and abrasion-resistant and are used often in meat/poultry applications.
- SuperFabric Combinations of the number of layers, thickness, substrates, surface coatings, etc., lead to fabrics which have varying levels of puncture, cut and abrasion resistance, grip and flexibility. Tactile surface offers improved grip of wet and oily surfaces.
- Steel Core gloves are cut- and abrasion-resistant and are often used for meat/poultry processing, glass handling, metal fabrication, automotive manufacturing as well as being used in the paper industry
- Vectran: Gloves made from the Vectran fiber materials are cut- and abrasion-resistant, flexible and offer mid level heat protection. This glove material is often used in the rubber industry as well as plastic manufacturing and metal handling.
There are many different glove materials in the market that have a variety of performance characteristic and are used for many different applications.
Although the above materials are known to provide excellent cut-resistance, any glove material will provide some measure of cut-resistance. DUPONT manufacturing performed a cut-resistance test called a Cut Protection Performance Test (CPPT) comparing leather, cotton, standard Kevlar and Kevlar Plus materials. They found that the Kevlar Plus outperformed the standard Kevlar, cotton and leather materials. The results showed that standard Kevlar had the next best results followed by cotton and then leather pertaining to these specific materials.
Manufacturers typically use the ASTM F-1790 standard for measuring the cut protection performance of protective apparel. This test method uses force-distance testers to determine how resistant a material is to cuts when exposed to a cutting edge under specific loads. This method provides data to differentiate the cut resistance of common material such as cotton, leather and high performance fibers. Results are provided in terms of grams of weight applied to the specific material being tested.
Another testing agency which rates fabric and cut resistance is ANSI / ISEA (American National Standards Institute)/(International Safety Equipment Association). This standard is similar to the European standard:
ANSI/ ISEA 105-2005 Mechanical Ratings
| Rating | Level 0 | Level 1 | Level 2 | Level 3 | Level 4 | Level 5 | Level 6 |
|---|
| Abrasion Resistance* (Cycles) | < 100 | ≥ 100 | ≥ 500 | ≥ 1000 | ≥ 3000 | ≥ 10000 | ≥ 20000 |
| Cut Resistance (Grams)** | < 200 | ≥ 200 | ≥ 500 | ≥ 1000 | ≥ 1500 | ≥ 3500 | - |
| Puncture Resistance (Newtons) | < 10 | ≥ 10 | ≥ 20 | ≥ 60 | ≥ 100 | ≥ 150 | - |
* Abrasion ratings 0 through 3 are based on measurement with a 500-gram load. Levels 4 through 6 are measured with a 1,000-gram load. ** Weight needed to cut through material with 25mm of blade travel |
TIME OF DELIVERY:We do our best to ship out the item within 24 hours, but c2csafety is not responsible for service transit times. This information is provided by the carrier and excludes weekends and holidays.
Domestic First Class mail takes approximately 7-14 business days. Do not use if in a hurry.
Domestic Priority mail takes approximately 3-7 business days
International First Class mail packages takes approximately 21-51 business days.
International Priority mail takes approximately 14 business days.
International Express Mail takes approximately 5 business days.
FDX/UPS ships as listed.
Due to problems with extreme delayed mail and mail theft we do no longer accept orders to Russia, Ukraine, Poland, Croatia, Serbia and Italy. We can arrange INSURED EXPRESS mail upon request.
COMBINED SHIPPING:
To calculate your freight please try the shipping calculator on each page. If buying multiple items from multiple auctionsplease ask for combined invoice before paying. If items can ship together in same package we will send you a new invoice with adjusted freight. Not all items are eligible for combined shipping. Length plus Girth cannot exceed 79 inches for international and 108 inches for domestic packages. Multiple purchases will only be eligible for combined shipping & handling rates if all items are paid for in a single transaction. If you pay for the items separately, they will be pulled, packed and shipped separately, and no S&H discounts will apply.
Yes we can ship with USPS to APO, FPO, Hawaii, Puerto Rico and Guam.
Please ask for this option to be added after you buy, but before you pay. We will send you a new invoice.
MUST READ: Signature release.
If Fedex or UPS leaves your package at your door we are NOT responsible for any theft. We will file a claim for you, but if it is denied there is nothing we can do. For an additional charge of $2.25 we can add signature release. You have to ask for and pay for this option. It is NOT added automatically because most customers want the package to be dropped at the door if they are not home.
TRACKING
We confirm orders and post tracking on Ebay within 24-48 hours of shipping. IF YOUR PACKAGE SHIPS WITH USPS, THERE IS NO TRACKING AVAILABLE. We print the label electronically and generally you will see a message regarding the date the label shipped until the item is delivered to your door and scanned by your carrier.
WARRANTIES:
We guarantee all of our items to work and be free from manufacturer's defects. Defective items may be returned within 7 days of receipt for a replacement or full refund free of charge. After 7 days, buyer is responsible for return shipping costs. At which time a replacement will be sent at our cost or a refund of the purchase price will be given.
Non-defective items may be returned in original condition within 7 days of receipt for a refund of the purchase price of the item(s) less shipping. Buyer is responsible for return shipping costs.
Some manufacturers require that you send the item directly back to them for warranty claim that includes Pelican and Streamlight. Please inquire if needed.
INTERNATIONAL CUSTOMERS MUST READ:
Please do not ask us to alter or write a lower amount on the customs form. That is against the law.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Please note that in some countries these charges can be anywhere between 10 – 60 % of the price of the goods + shipping that you've purchased. If in doubt pls contact your local government before ordering.
100% Satisfaction Guarantee
Please
....Do not leave negative feedback OR DSR rating below 5. Any bad feedback or DSR rating below 5 sincerely undercuts our ability to provide these absolutely incredible deals. We want all of our customers to be happy with their purchase and shopping experience with us. If for any reason you are not satisfied with you purchase, please contact us so we can make it right. If you need to contact us please use the Ebay message system as it is more dependable than regular email. Regular emails are often being blocked by your email provider or ends up in your spam filter
ALL ITEMS ARE BRAND NEW IN MFG PACKAGING AND CURRENT STOCK.
CUSTOMER SERVICE MONDAY-FRIDAY 8.00-5.00 (Pacific Standard Time)
C2CSAFETY - 866-910-0906
Rev-FEB10
Sign In
BBLiNs0KpzQ~~_1_1733_1.JPG)
