Below are the available bulk discount rates for each individual item when you purchase a certain amount
- Buy 2 - 9 and get $1.00 off
- Buy 10 or above and get $2.00 off
3M Particulate Filter 2091/07000(AAD), P100 - 1 PACK = 1 PAIR = 2 EACH
- Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
- Versatile protection against many oil and non-oil based particulate contaminants
- Bayonet compatibility allows use with many 3M™ half and full facepiece reusable respirators
NIOSH approved for environments containing certain oil and non-oil based particles.
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M?s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant.
3M personal protective equipment sold through Shop3M.com is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist.
When properly fitted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH).
(Please note this listing is for 1 pair = 2 ea/pack)